Hi-Spec V Series – Vertical Mixers

The V series is a single-auger vertical mixer ranging in capacity from 7 to 16 m³.

The strength and build quality are clearly visible in the V series. The independent reinforced chassis and single axle provide a stable base for the mixer body. Numerous options exist for different loading and unloading configurations.
The independent chassis is equipped with four Dinamica Generale load cells as standard (one on each corner), ensuring highly accurate weight measurement of the mixes.

V Series – Single Auger

Features

Strength

Reinforcement in the lower section of the floor strengthens the machine against vertical forces generated during forage loading. This design feature is unique to Hi-Spec.
The mixer bodies in the V series are made from high-quality 8 mm steel. The conical shape ensures efficient mixing and maximum capacity.
Thanks to their strength, the bodies are highly resistant to wear. The upper section is also tapered inward, which reinforces the structure and increases natural rigidity.
A spill ring is fitted at the top to prevent material loss.

Gearboxes

Hi-Spec uses Comer gearboxes as standard for all vertical mixers. Comer Industries is a global leader in the design and manufacture of drive systems, founded in Italy in the 1970s and supplying to over 60 countries.
As standard, the mixers are equipped with heavy-duty PGA gearboxes that deliver high torque for smooth chopping and mixing. Each gearbox has its own oil reservoir.
Maintenance is made easy through an inspection port on the auger.

For mixers above 12 m³, a two-speed gearbox is available – allowing low-speed operation with lower-horsepower tractors and safe restart after stopping, as well as high-speed operation for fast and complete unloading.
For smaller models (up to 12 m³), this option is available upon request.

Mixing

The V series uses a central vertical auger for chopping and mixing.
The process runs in a continuous cycle – forage is lifted up the auger flights, falls down the conical walls, and is mixed again.
For chopping, the auger is equipped with self-sharpening knives mounted on 15 mm plates for additional strength.
The knives can be adjusted to three positions for different cutting lengths.

Two counter-plates mounted on the body hold the material as the auger cuts it before it begins mixing.
The counter-plates are also adjustable for added flexibility.

Weighing System

The mixers come standard with four Dinamica Generale load cells and the DG600 display, providing extremely accurate measurements.
The DG600 features a fast microprocessor and an easy-to-read backlit white display.

Functions of the DG600:

• Creation of various recipes for multiple sheds
• Option to choose 1 ingredient for 99 sheds or 99 ingredients for 1 shed (or combinations)
• Mixing time control
• Compatible with DTM Daily TMR software
• Base recipe and batching functions

Additional Standard Features

• PTO drive 540–1000 rpm
• Comer PGA gearbox
• 4 × Dinamica Generale load cells
• DG600 programmable display
• Reinforced 20 mm floor
• Auger with 15 mm flights
• 8 mm body
• Adjustable serrated knives
• Kicker plate
• Adjustable counter-plates
• Gearbox oil reservoir
• Viewing ladder
• Spill ring
• Single discharge door
• Adjustable discharge chute
• Drawbar stand
• Manual brake
• Ring drawbar eye
• Hydraulic brakes
• LED light (x1)
• Original Hi-Spec red coating
• Mudguards