Hi-Spec T Series – Vertical Mixers

Hi-Spec T-Series – Specification

General characteristics

• Vertical mixer wagon with two vertical augers (twin auger).

• Capacity range: from 14 to 32 m³.

• Designed for operators with high-volume mixing requirements.

• 20 mm thick floor plate with vertical reinforcement underneath for improved resistance to vertical loading during filling.

• 8 mm thick body side walls manufactured from high-quality steel.

• Upper body section redesigned with a protected spillage ring to reduce material loss while maintaining strength.

• Dual-speed auger drive option:
Low speed — for tractors with lower horsepower.
High speed — for fast discharge.

• “Feed Motion” auger action — moves the feed vertically and horizontally in a figure-8 pattern for a more homogeneous mix.

• Self-sharpening cutting knives mounted on augers with 15 mm backing plates.

• Adjustable counter plates — hold the bale or forage in position during cutting and mixing.

• Four weigh-cells (Dinamica Generale) as standard.

• DG600 display — shows weight and mixing time, enables recipe setup, batch control, data storage and TMR software compatibility.

Dimensions, weight and variants

Model	Capacity	Width (W)	Height (H)	Length (L)	Floor/Foot Height (F)	Weight
T 14	14 m³	2,220 mm	2,750 mm	6,520 mm	850 mm	~ 6,000 kg
T 16	16 m³	2,220 mm	3,025 mm	6,570 mm	850 mm	~ 6,500 kg
T 18	18 m³	2,620 mm	2,620 mm	7,330 mm	850 mm	~ 7,060 kg
T 20	20 m³	2,620 mm	2,870 mm	7,330 mm	850 mm	~ 7,260 kg
T 24	24 m³	2,620 mm	3,070 mm	7,530 mm	850 mm	~ 7,660 kg
T 27	27 m³	2,860 mm	3,400 mm	7,640 mm	925 mm	~ 8,660 kg
T 32	32 m³	3,020 mm	3,400 mm	7,640 mm	925 mm	~ 9,000 kg

• PTO input 540–1000 rpm.

• Comer PGA reduction gearbox for augers.

• Gearbox oil reservoir.

• Spillage ring, viewing ladder, adjustable feed-out chute, discharge door.

• Hydraulic braking system, LED road lighting, mudguards, adjustable feed-out system (door/chute).